9 mm PET felt acoustic wall tiles 1200x600x9 mm – ready-to-install acoustic panels for adhesive mounting
The vitAcoustic acoustic wall tiles are precut wall panels made from our 9 mm PET felt acoustic panel – in a manageable 1200x600x9 mm format, a quarter of a full panel. We developed them for home improvement retailers, DIY users and end customers: small, easy-to-handle elements that one person can glue to the wall alone – without cutting, special tools or a second person.
The small format offers several advantages: affordable parcel shipping instead of bulky freight shipments, space-saving storage and simple, step-by-step installation – from a single accent area to full wall cladding. You can build up your wall design gradually, in a single color or a lively pattern.
Benefits of the wall tiles
-
One-person installation – manageable tiles, no second person needed
-
Ready to install – unpack and glue in place, no cutting, no special tools
-
Affordable parcel shipping – compact 1200x600x9 mm instead of large raw panels
-
No cutting waste – order exactly the number of tiles you need
-
Modular & available to reorder – add, combine or replace individual tiles at any time
Why 9 mm is enough for sound absorption
Like any soft fibrous absorber, PET felt “slows down” sound as air flows through the open felt structure and loses energy. Directly against a hard wall, however, the air barely moves – even a thick panel absorbs only high frequencies there. An air cavity behind the tile (e.g. battens) is what gets the air moving, allowing the felt to work where it matters in everyday life: in the human voice range (around 200–500 Hz). It is therefore not the material thickness that determines performance, but the assembly.
Acoustic performance (tested to ISO 354, rated to DIN EN ISO 11654)
The tiles are acoustically identical to our 9-mm panel stock – you control their performance through the mounting method. We specify the weighted sound absorption coefficient αw and the commonly used NRC value:
-
Adhered directly to the wall: αw 0.25 / NRC 0.30 – Class E (decorative, low absorption)
-
On battens with a ~50 mm air gap: αw 0.55–0.60 / NRC 0.65 – Class D–C (noticeably broader-band absorption)
-
100 mm air gap (battens): αw 0.75 / NRC 0.75 – Class C
-
150 mm air gap (battens): αw 0.80 / NRC 0.80 – Class B
-
Battens with insulation or nonwoven composite (9 + 40 mm): sound absorption class A – plus vapor-permeable thermal insulation
All classes and performance values refer to the stated mounting method; measurements to ISO 354, ratings to DIN EN ISO 11654. Practical absorption in the speech-relevant range of 200–500 Hz is particularly high with an air gap.
The wall tiles thus help reduce reverberation time in accordance with DIN 18041 and improve speech intelligibility. For the highest Class A with flat mounting, we recommend the nonwoven composite or battens with insulation. For custom cuts larger than 1200x600x9 mm, see our 9-mm panel stock cut to size.
Textures – our distinctive design feature
The tiles offer much more than a smooth surface: We have developed our own genuine V-Cut textures, cut into the material as V-shaped grooves – not a printed image, but a sculpted, tactile texture with depth. Their design draws on traditional craftsmanship: the nominal dimension, an octametric dimensional system based on the eighth-meter module (12.5 cm). This dimensional system not only minimizes cutting waste, it also improves the appearance of exposed masonry – and allows the tiles to be combined vertically, horizontally and rotated (placed next to one another) without the tile joint standing out. This creates large, continuous wall compositions from individual tiles.
-
Bricks – masonry texture in a “random bond”: a fascinating, lively brick texture; the brick sizes follow the nominal dimension, allowing surfaces to continue seamlessly.
-
Triangle-V (orthogonal) and Triangle-D (diagonal): modern triangular textures based on the eighth-meter nominal dimension – graphic, calm and combinable in any direction.
-
Lines: fine grooved texture with various spacings (100 / 38 / 15 mm), plus Lines irregular (lengthwise, crosswise, diagonal) for a livelier line pattern.
-
Without texture – elegant modular structure: simple and timeless; each tile is chamfered all around, and the fine 2–3-mm joint visually compensates for substrate tolerances. The interplay of color and vertical or horizontal orientation creates individual, elegant wall structures.
-
Custom design: your own texture based on your template.
The V-Cut textures are more than a design feature: The grooves increase the surface area and additionally scatter sound (diffusion) – reducing flutter echoes and allowing sound to decay more evenly throughout the room.
Applications and typical uses
- Acoustic wall cladding in offices, conference rooms and coworking spaces
- Sound-absorbing wall designs in schools, daycare centers and clinics
- Decorative accent walls in hotels, restaurants and reception areas
- Medical practices and therapy rooms – speech privacy and a quiet atmosphere
- Multicolor wall patterns and color compositions as a design feature
- CMYK-printed acoustic art panels, company logos and photographic images
- V-Cut textures for tactile, sculpted surface designs
For home builders and homeowners: Installed on battens with insulation, the tiles combine two things that otherwise cost money separately – thermal insulation and acoustics in one. This saves costs and noticeably improves living comfort: warm walls that do not feel clammy, significantly less reverberation and an attractive, colorful wall design that becomes a focal point. The vapor-permeable PET structure lets the wall breathe while you improve room acoustics and appearance in a single installation – ideal for living rooms, bedrooms and studies, home offices or home theaters.
Wall cladding: decorative, acoustically effective and thermally insulating
As acoustic wall cladding, the PET felt panels combine design and function in a single layer. More than 50 colors are available, all with fire classification B-s1,d0 (flame-resistant to EN 13501-1). With V-Cut textures and UV direct printing, the panel becomes a customized wall surface – from a calm, single-color surface to an image or logo.
The wall cladding serves two functions: It absorbs sound and also provides interior thermal insulation for the wall. The textile surface feels warmer than plaster, concrete or glass and stays warmer than the cold wall behind it – a noticeable comfort benefit, particularly in rooms that are not heated continuously for cost reasons. A single material thus provides acoustic comfort and a warmer feel to the room.
Fabrication and installation – manageable by one person
One person can position the manageable tiles – no second person needed. Cutting is only necessary to fit wall dimensions and make cutouts (e.g. for power outlets) – simply use a knife or utility knife; the material does not crumble or generate dust during cutting. You have several mounting options:
-
Direct adhesive mounting (the newer option): particularly as a nonwoven composite – the tile with a 40-mm nonwoven backing is adhered directly to the wall, achieving sound absorption class A without battens. Clean and degrease the substrate, then secure with a tested adhesive (e.g. UHU Polymax High Grip, UHU por) or double-sided adhesive tape (CT-S 5735).
-
On battens (the traditional option): with an air gap (e.g. 50 mm) for higher, broadband absorption; optionally fill the cavity with insulation – this provides Class A plus vapor-permeable thermal insulation.
-
Magnets or Z-clips (optional): for precisely aligned installation that can be removed without tools.
Tested adhesives are available from us as an option.
Cleaning and care: vacuum or wipe with a damp cloth, as with textile coverings. Stubborn grease stains can be dissolved with a little thinner, and coffee or wine stains bleached with hydrogen peroxide (H2O2) – without damaging the PET fiber or color.
Colors, availability and delivery time
Our PET colors are divided into four collections – these determine storage location, minimum quantity and delivery time, depending on color and material thickness (the same color may belong to a different collection depending on thickness). The collection is indicated in the article number; the current stock level, delivery time and minimum order quantity are shown for each item directly in the “PET color” selection field.
-
Standard & Trend: over 30 colors permanently stocked at our warehouse in Germany, with ongoing replenishment – available from 1 panel, smaller quantities usually in just 1–2 weeks, including cutting to size and processing
-
Extended: also available from 1 panel, with a delivery time of approx. 6 weeks (rail freight). We stock several thousand panels in selected colors and thicknesses in Germany, and many times that quantity at our production site – because changeovers in PET manufacturing involve high setup costs, production is only economical in large quantities. This inventory investment is supported by the global market, not Europe alone; it enables us to offer the full range of colors and thicknesses
-
Production: manufactured specifically for your project – from approx. 300 panels (in some cases from as few as 200). We can start a batch at any time, match any desired color and supply custom sizes; production runs continuously at a width of 244 cm, with separating cuts freely selectable in width and length
Fast delivery including cutting to size and processing is one of our strengths – particularly for projects with tight deadlines.
Note on quantities: “from 1 panel” and “from approx. 300 panels” refer to whole raw panels (2440x1220x9 mm) from which we cut your tiles – not the number of finished tiles. Depending on the format, several tiles are produced from one raw panel.
Material and manufacturing
The vitAcoustic wall tiles are made from recycled PET plastic bottles, processed into textile fibers and laid into a fiber web using a felting process. This web is thermally bonded: A proportion of blended-in PET binder fibers (bicomponent fibers) partially melts in the oven and fuses the structure into a dimensionally stable panel – entirely without chemical adhesives or binders. The recycled content is certified by SCS Global Services.
- High areal weight (1.9 kg/m²), yet low individual weight (approx. 1.4 kg per tile) – dimensionally stable and easy to handle
- Unaffected by moisture and water-resistant
- Resistant to mold, pests and house dust mites
- Suitable for allergy sufferers – no volatile constituents
- Fully recyclable at the end of its service life
Certificates and standards
Tested for harmful substances and low-emission: Our PET acoustic panels are GREENGUARD Gold certified (UL 2818) and meet strict limits for chemical emissions indoors. Formaldehyde emissions are well below the requirements that apply throughout the EU from August 6, 2026 (REACH Annex XVII). The materials are also tested for substances of concern to health in accordance with OEKO-TEX Standard 100.
Fire safety even in freestanding use: The 9-mm PET felt also achieves Class B-s1,d0 in freely suspended or freestanding applications – without rear attachment – (flame-resistant, EN 13501-1, TÜV SÜD) – relevant for ceiling clouds, baffles and room dividers.
-
Flame-resistant to EN 13501-1 (B-s1,d0) – tested by TÜV-SÜD, equivalent to fire classification B1 to DIN 4102
-
OEKO-TEX Standard 100 – tested for harmful substances, suitable for kindergartens, schools and clinics
-
Greenguard Gold – low VOC emissions for healthy indoor air
-
EPD (Environmental Product Declaration) – relevant for DGNB and LEED certification
-
SCS Recycled Content – certified recycled content
Technical properties
| Property |
Value |
| Construction |
Single-layer PET felt, thermally bonded (binder fibers); fixed-size tile 1200x600x9 mm |
| Material |
PET felt from recycled PET bottles, thermally bonded – without chemical binders |
| Thickness |
9 mm |
| Areal weight |
1.9 kg/m² (approx. 1.4 kg per tile) |
| Acoustic function |
Porous broadband sound absorber; performance adjustable through air gap/assembly |
| Sound absorption class |
E direct · D–C (50–100 mm battens) · B (150 mm) · A with battens with insulation or as a nonwoven composite |
| αw |
0.25 (direct) · 0.55–0.60 (50 mm) · 0.75 (100 mm) · 0.80 (150 mm); insulated/composite → A · to DIN EN ISO 11654 |
| NRC |
0.30 (direct) · 0.65 (50 mm) · 0.75 (100 mm) · 0.80 (150–200 mm); insulated/composite → up to 1.0 |
| Frequency range |
Broadband; particularly effective in the speech range of 200–500 Hz with an air gap |
| Edge finish |
Chamfered all around; fine installation joint 2–3 mm |
| Surface texture |
Smooth or V-Cut (Bricks, Triangle-V/-D, Lines 100/38/15, Lines irregular); custom; UV printing |
| Color configuration |
50+ design colors in stock; others available through custom production; multicolor combinations also possible |
| Made to measure |
Fixed size 1200x600x9 mm (¼ panel); custom sizes available from panel stock |
| Fire classification |
Flame-resistant B-s1,d0 to EN 13501-1 (TÜV SÜD; equivalent to DIN 4102 B1) |
| Recycled content |
Recycled PET, content certified by SCS |
| Environmental declaration |
EPD (relevant for DGNB/LEED); GREENGUARD Gold (UL 2818, below REACH emission limit) |
| Harmful substance testing |
OEKO-TEX Standard 100 |
| Care |
Vacuum / wipe with a damp cloth; remove grease with thinner, bleach coffee/wine stains with H2O2 (without damaging the material) |
Samples, data sheets and shipping
Free color samples are available in the Samples and Miscellaneous category. Technical data sheets, absorption values and certificates can be found in our download area. Shipped in a cardboard box by parcel service. For custom cuts larger than 1200x600x9 mm, see our panel stock cut to size. Our further development, vitAcoustic Elements, offers even more shapes and sizes (from 400x400x9 mm to 1200x1200x9 mm) – ready-made Class A absorbers for walls and ceilings.
Are you planning a project or need custom sizes? Call us at +49 7248-93566-90 or email [email protected].