Ceiling mounting set for Halfen channel.
Consisting of:
M10x1 cap, nickel-plated
Short M10x1 fitting, nickel-plated
Wire rope ø 1.5 mm, 6x7 + 1 SE, 1770 N/mm², with ball nipple ø 5.0 mm, length = 1500 mm
Slotted M10x1 fitting, nickel-plated
Gripper15 M10x1, nickel-plated, max. wire rope Ø1.5 mm
Pan head screw M6x12; DIN 7985; zinc-plated.
Washer for M6; 6.4x25x1.5, zinc-plated.
The ceiling mount with gripper or the universal mount can either be screwed into the Halfen channel or mounted to the ceiling.
(Please note that, for warranty reasons, we do not supply anchors or screws for ceiling mounting. These must be procured on site in accordance with building regulations.)
The end of the wire rope is inserted into the universal mount and can be adjusted using the gripper on the ceiling mount.
Excess wire rope must be cut off or concealed.
