12 mm PET felt acoustic panels – 280 cm large format, sound absorbers and made-to-measure wall cladding
The vitAcoustic 12 mm PET felt acoustic panel is the larger, slightly thicker counterpart to our 9-mm base panel. Its large stock size of 2800x1225x12 mm is its key advantage: it lets you clad floor-to-ceiling surfaces with a single panel – without joints or visible seams, creating a continuous, visually calm wall surface at standard room heights.
At around 2.4 kg/m², the 12-mm panel is denser and heavier than the 9-mm version – making it even more dimensionally stable, with a higher-quality edge and slightly broader-band sound absorption. It can also be cleanly sawn and cut to size using standard woodworking machines. Otherwise, it is technically identical to the 9-mm panel.
Why the mounting configuration determines absorption
Like any soft fibrous absorber, PET felt “slows down” sound as air flows through its open felt structure and loses energy. Directly against a hard wall, however, the air barely moves – so even a thick panel only absorbs high frequencies there. Only an air cavity behind the panel gets the air moving, allowing the felt to work where it matters in everyday use: in the human voice range (around 200–500 Hz).
Performance therefore depends less on material thickness than on the air gap behind the panel or the supporting structure. The slightly greater thickness of the 12-mm panel does provide a noticeable benefit, however: it absorbs across a broader frequency range and, with an air gap, achieves one sound absorption class higher than the 9-mm panel.
Acoustic performance (tested to ISO 354, rated to DIN EN ISO 11654)
The following values apply to flat-mounted panels – depending on the air gap behind them. We list both the weighted sound absorption coefficient αw and the commonly used NRC value:
-
Directly on the wall: αw 0.25 / NRC 0.30 – sound absorption class E
-
50 mm air gap: αw 0.60 / NRC 0.70 – class C
-
100 mm air gap: αw 0.80 / NRC 0.80 – class B
-
150 mm air gap: αw 0.90 / NRC 0.90 – sound absorption class A
-
Nonwoven composite (12 + 40 mm) or ceiling cloud: sound absorption class A
All classes and performance values refer to the mounting method specified; measured to ISO 354, rated to DIN EN ISO 11654. With a large air gap, physical cancellation in the mid-frequency range limits the calculated weighted single-number value αw; actual absorption in the speech range of 200–500 Hz is nevertheless very high.
The panels therefore help meet DIN 18041 requirements for reducing reverberation time and noticeably improve speech intelligibility. For the highest class A with flat wall mounting, we recommend the vitAcoustic nonwoven composite; for a suspended solution, our made-to-measure ceiling clouds.
Applications
Floor-to-ceiling wall cladding: The large format comes into its own wherever a seamless, continuous wall design is required – in offices, reception and conference areas, hotels or prestigious interiors.
Offices and open-plan spaces: Used as sound-absorbing wall cladding or suspended ceiling clouds, the panels lower noise levels, reduce reverberation and improve speech intelligibility.
Hotels, restaurants and commercial interiors: They provide acoustic comfort in lobbies, restaurants and bars; in retail fit-outs, they serve as decorative, acoustically effective wall surfaces.
Medical and therapy practices: Greater privacy through reduced speech transmission – tested for harmful substances and hygienically safe.
Wall cladding: decorative, acoustically effective and thermally insulating
As acoustic wall cladding, the PET felt panels combine design and function in a single layer. More than 50 colors are available, all with fire classification B-s1,d0 (flame-resistant to EN 13501-1). V-Cut textures and UV direct printing turn the panel into a customized wall surface – from a calm, solid-color finish to an image or logo.
The wall cladding serves two functions: it absorbs sound while also insulating the wall on the room side. The textile surface feels warmer than plaster, concrete or glass and stays warmer than the cold wall behind it – a noticeable improvement in comfort, particularly in rooms that are not continuously heated for cost reasons. A single material thus provides acoustic comfort and a warmer room feel.
Configuration – one product, many possibilities
You can configure each panel directly when ordering. The options reflect our CNC machining capabilities and apply per panel:
-
CNC cutting to size: multiple parts from a single panel, including freeform shapes from DXF files
-
Chamfers and miters: V-Cut chamfers (30°/45°) and miter-fold edges for clean corners and joints
-
Duo – double-layer 2×12 mm: creates a 24 mm thick panel (4.8 kg/m²), optionally in two colors. This makes virtually all colors available in 24 mm too. (Similarly, the 9-mm panel creates an 18 mm Duo.)
-
Nonwoven composite: 12 mm PET on 30/40 mm PET nonwoven for sound absorption class A with flat wall mounting
-
V-Cut textures: Lines, Bricks, Triangle and custom designs in various angles and depths. The grooves do more than create a design: they increase the surface area and additionally scatter sound (diffusion) – reducing flutter echoes and allowing sound to decay more evenly throughout the room.
-
UV direct printing (CMYK): full-surface custom colors, images, photos or logos
Related material thicknesses include the 9-mm base panel (size 2440x1220x9 mm, 18 mm as Duo) and the 24-mm panel. Our ready-made vitAcoustic Elements offer more shapes and sizes (400x400x9 mm to 1200x1200x9 mm).
Colors, availability and delivery time
Our PET colors are divided into four collections – these determine stock location, minimum quantity and delivery time, depending on color and material thickness (the same color may belong to a different collection depending on thickness). The collection is included in the article number; you can see the current stock level, delivery time and minimum order quantity for each item directly in the “PET color” selection field.
-
Standard & Trend: over 30 colors continuously stocked at our warehouse in Germany and regularly replenished – available from 1 panel, with smaller quantities generally delivered in just 1–2 weeks including cutting to size and machining
-
Extended: also available from 1 panel, with a delivery time of approx. 6 weeks (rail freight). We stock several thousand panels in selected colors and thicknesses in Germany, and many times that number at our production site – because changing over PET production involves high setup costs, it is only economical in large quantities. This inventory investment is supported by the global market, not Europe alone; it enables us to offer the full range of colors and thicknesses
-
Production: manufactured specifically for your project – from approx. 300 panels (in some cases from 200). We can start a batch at any time, match any desired color and supply custom sizes; production runs continuously at a width of 244 cm, with cuts in width and length freely selectable
Fast delivery including cutting to size and machining is one of our strengths – particularly for projects with tight deadlines.
In 12 mm, most colors currently belong to the Extended collection – the information shown in the dropdown is definitive.
Important transport and cost considerations: Because of its 280 cm length, the 12-mm panel is shipped exclusively by freight forwarder (palletized freight) with a long-length surcharge – resulting in significantly higher transport costs. Delivery with a liftgate is not possible at 280 cm (liftgate delivery only up to 240 cm); a forklift should therefore be available on site for unloading. The large format is most economical for projects of around 20–30 panels or more, where the seamless, floor-to-ceiling surface justifies the additional expense.
For smaller quantities, we specifically recommend our 9-mm panel in 2440x1220x9 mm format: suitable for shipping as palletized freight, quickly available from stock and significantly less expensive to ship than the 280-cm large format – with almost equivalent acoustic performance and entirely sufficient for most applications. (We keep the 9-mm panels in 2440x1220x9 mm in stock and can cut them to size immediately.)
Material and manufacturing
The vitAcoustic PET felt panel is made from recycled PET plastic bottles, which are processed into textile fibers and laid into a fiber web using a felting process. This is then thermally bonded: a proportion of blended-in PET binder fibers (bicomponent fibers) partially melts in the oven and bonds the structure into a dimensionally stable panel – entirely without chemical adhesives or binders. The many colors and mottled finishes are created by mixing differently colored fibers before bonding. The recycled content is certified by SCS Global Services.
Note on the nonwoven composite: Unlike the rigid panel, the PET nonwoven backing is not thermally bonded. It remains soft and flexible and provides lower-frequency absorption within the composite, while the rigid panel forms the decorative visible face.
Acoustics and thermal insulation in one: With its vapor-permeable PET fiber structure, the panel also provides thermal insulation – particularly as a nonwoven composite with our PET nonwoven: sound absorption and thermal insulation in a single assembly, for warm walls that do not feel clammy – also suitable for interior walls and sloped ceilings. We also offer the matching PET nonwoven separately: 30 mm and 40 mm.
- High areal weight (2.4 kg/m²) – densely compressed, dimensionally stable and with a firm edge
- Unaffected by moisture and water-resistant
- Resistant to mold, pests and dust mites
- Suitable for allergy sufferers – no volatile constituents
- Fully recyclable at the end of its service life
Fabrication and installation
The panel is designed for fabrication with standard woodworking tools: clean sawing and cutting to size (circular saw or jigsaw, oscillating knife). Various mounting systems are available depending on the application:
-
Adhesive mounting: e.g. UHU Polymax High Grip, UHU por contact adhesive or double-sided adhesive tape (CT-S 5735)
-
Screws and staples: particleboard screws, staple gun staples
-
Z-clips (Z-Clip): for removable, precisely aligned wall mounting
-
Magnetic mounting: for panels that can be removed without tools from a magnetic substrate
-
Ceiling suspension cables: for freely suspended ceiling clouds at the desired height
-
Halfen channels: for baffles and wall baffles, including installation in rows
Cleaning and care: vacuum or wipe with a damp cloth, as with textile coverings. Stubborn grease stains can be dissolved with a little thinner, and coffee or wine stains bleached with hydrogen peroxide (H2O2) – without damaging the PET fiber or color.
Certifications and standards
Tested for harmful substances and low-emission: Our PET acoustic panels are GREENGUARD Gold certified (UL 2818) and comply with strict limits for indoor chemical emissions. Formaldehyde emissions are well below the requirements applicable throughout the EU from August 6, 2026 (REACH Annex XVII). The materials are also tested for substances of health concern to OEKO-TEX Standard 100.
-
Flame-resistant to EN 13501-1 (B-s1,d0) – tested by TÜV-SÜD, equivalent to fire classification B1 under DIN 4102
-
OEKO-TEX Standard 100 – tested for harmful substances, suitable for kindergartens, schools and clinics
-
Greenguard Gold – low VOC emissions for healthy indoor air
-
EPD (Environmental Product Declaration) – relevant to DGNB and LEED certification
-
SCS Recycled Content – certified recycled content
Technical properties
| Property |
Value |
| Construction |
Single-layer PET felt, thermally bonded (binder fibers); optional double-layer “Duo” = 24 mm |
| Material |
PET felt from recycled PET bottles, thermally bonded – without chemical binders |
| Thickness |
12 mm (Duo 24 mm) |
| Areal weight |
2.4 kg/m² (Duo 4.8 kg/m²) |
| Acoustic function |
Porous broadband sound absorber; performance adjustable through air gap/mounting configuration |
| Sound absorption class |
E directly mounted · C (50 mm air gap) · B (100 mm air gap) · A (150 mm air gap, nonwoven composite or ceiling cloud) |
| αw |
0.25 (directly mounted) · 0.60 (50 mm air gap) · 0.80 (100 mm air gap) · 0.90 (150 mm air gap); composite/cloud → A · to DIN EN ISO 11654 |
| NRC |
0.30 (directly mounted) · 0.70 (50 mm air gap) · 0.80 (100 mm air gap) · 0.90 (150 mm air gap) |
| Frequency range |
Broadband; low-mid-frequency absorption peak depending on air gap (speech range 200–500 Hz) |
| Edge finish |
CNC-cut edge; optional V-Cut miter/chamfer (30°/45°, folding edge) |
| Surface texture |
Smooth or V-Cut (Lines/Bricks/Triangle); optional UV printing |
| Color configuration |
50+ design colors (12 mm predominantly Extended); two-color Duo |
| Made to measure |
CNC cutting to size from raw panel 2800x1225x12 mm; freeform shapes from DXF files |
| Fire classification |
Flame-resistant B-s1,d0 to EN 13501-1 (TÜV SÜD; equivalent to DIN 4102 B1) |
| Recycled content |
Recycled PET, content certified by SCS |
| Environmental declaration |
EPD (relevant to DGNB/LEED); GREENGUARD Gold (UL 2818, below REACH emission limit) |
| Harmful substance testing |
OEKO-TEX Standard 100 |
| Care |
Vacuum / wipe with a damp cloth; remove grease with thinner, bleach coffee/wine stains with H2O2 (without damaging the material) |
Samples, data sheets and shipping
Free color samples are available in the Samples and miscellaneous category. Technical data sheets, absorption values and certificates can be found in our download section. The large format is shipped as palletized freight by freight forwarder (long-length surcharge, no liftgate – a forklift should be available on site for unloading). For smaller formats that cost less to ship, see our 9-mm panel stock.
Planning a project or need custom sizes? Call us at +49 7248-93566-90 or email [email protected] – we manufacture to your specifications.