9 mm PET felt acoustic panels – sound absorbers and made-to-measure wall cladding
The vitAcoustic 9 mm PET felt acoustic panel is our base panel: we use it to manufacture almost all our ceiling clouds, wall absorbers, acoustic panels and cut-to-size pieces. It is also the easiest thickness to work with in our range – standard woodworking machinery produces particularly clean results when sawing and cutting it to size, noticeably more easily than with any thicker panel. This makes it the ideal base material for cabinetmakers, retail fit-out specialists and fabricators looking to integrate PET felt into their own furniture, installations and projects.
At around 1.9 kg/m², the panel has a high areal weight – it is pressed to a significantly higher density than many lighter PET felts. This makes it dimensionally stable and gives it a firm middle layer and a clean, durable edge that even withstands fingernail pressure. The stock size is 2440x1220x9 mm; any custom cut is possible.
Why 9 mm is enough for sound absorption
Like any soft fibrous absorber, PET felt “slows down” sound as air flows through its open felt structure and loses energy. Directly against a hard wall, however, the air barely moves – even a thick panel can do little there and absorbs only high frequencies. An air cushion behind the panel is needed to get the air moving, and that is when the felt works where it matters in everyday use: in the range of the human voice (around 200–500 Hz).
Performance therefore depends not on material thickness, but on the air gap or supporting structure. For sound absorption alone, 9 mm is entirely sufficient – it just needs to be used correctly: with a small air gap, as a freely suspended ceiling cloud or as a composite panel with nonwoven fabric.
Acoustic performance (tested to ISO 354, rated to DIN EN ISO 11654)
The following values apply to flat-mounted panels – depending on the air gap. The highest absorption (class A) is achieved with a nonwoven composite or a suspended ceiling cloud. We specify both the weighted sound absorption coefficient αw and the commonly used NRC value:
-
Directly on the wall: αw 0.25 / NRC 0.30 – sound absorption class E
-
50 mm air gap: αw 0.55–0.60 / NRC 0.65 – class D–C
-
100 mm air gap: αw 0.75 / NRC 0.75 – class C
-
150 mm air gap: αw 0.80 / NRC 0.80 – class B
-
Nonwoven composite (9 + 40 mm) or ceiling cloud: sound absorption class A
Speech intelligibility depends above all on the low-mid frequency range around 200–500 Hz – the human voice frequencies that are hardest to control acoustically. This is precisely where the 9-mm panel performs best: as a freely suspended ceiling cloud with a gap of approximately 20 cm, its peak absorption falls right within this speech range. Since high frequencies in furnished rooms are already damped by people, textiles and furniture, a ceiling cloud of this kind comes very close in practice to the performance of a high-quality class A absorber.*
* With a large air gap, the weighted single-number rating αw to DIN EN ISO 11654 is mathematically limited by physical cancellation in the mid-frequency range (around ~850 Hz at 200 mm); practical absorption in the speech-relevant range of 200–500 Hz is, by contrast, very high. Freely suspended ceiling clouds work on both sides and without this cancellation. All class and performance ratings refer to the mounting method specified; measured values to ISO 354.
The panels thus support compliance with DIN 18041 for reducing reverberation time and noticeably improve speech intelligibility – whether used as sound-absorbing wall cladding, an acoustic panel or a suspended ceiling cloud. For the highest class A with flat wall mounting, we recommend the vitAcoustic nonwoven composite (9 mm PET panel on 40 mm PET nonwoven), or, for a suspended solution, our custom-made ceiling clouds.
Applications
Offices and open-plan spaces: As sound-absorbing wall cladding or suspended ceiling clouds, the panels lower noise levels, reduce reverberation and improve speech intelligibility – in meeting rooms, focus areas, phone booths and open-plan offices.
Hotels and restaurants: In lobbies, restaurants and bars, they provide acoustic comfort and pleasant noise levels – without restricting the design.
Medical and therapy practices: Greater privacy through reduced speech transmission in waiting and treatment areas – tested for harmful substances and hygienically safe.
Retail and commercial fit-outs: As backing for counters and shelving, display surfaces or designed acoustic panels – especially where quiet consultations matter, such as opticians, hearing care specialists, jewelry stores and fashion retailers.
Wall cladding: decorative, acoustically effective and thermally insulating
Used as acoustic wall cladding, the PET felt panels combine design and function in a single layer. Choose from more than 50 colors, all with fire classification B-s1,d0 (flame-resistant to EN 13501-1). V-Cut textures and UV direct printing turn the panel into a customized wall surface – from a simple single-color finish to an image or logo.
The wall cladding serves two functions: it absorbs sound and also insulates the wall on the room side. The textile surface feels warmer than plaster, concrete or glass and stays warmer than the cold wall behind it – a noticeable improvement in comfort, especially in rooms that are not heated continuously for cost reasons. One material thus provides both acoustic comfort and a warmer feel to the room.
Configuration – one product, many possibilities
Each panel can be configured when you place your order. The options reflect our CNC processing capabilities and apply per panel:
-
CNC cutting to size: multiple parts from one panel, including freeform shapes from DXF files
-
Chamfers and miters: V-Cut chamfers (30°/45°) and miter-fold edges for clean corners and joints – particularly recommended for assembled parts because of material tolerances
-
Duo – double-layer 2×9 mm: creates an 18 mm thick panel (3.8 kg/m²), optionally two-color with different front and back colors
-
Nonwoven composite: 9 mm PET on 30/40 mm PET nonwoven for sound absorption class A with flat wall mounting
-
V-Cut textures: Lines, Bricks, Triangle and custom designs at various angles and depths. The grooves are more than a design feature: they increase the surface area and also scatter sound (diffusion) – reducing flutter echoes and allowing sound to decay more evenly throughout the room.
-
UV direct printing (CMYK): full-surface custom colors, designs, photos or logos
Related material thicknesses include the 12 mm panel (size 2800x1225x12 mm) and the 24 mm panel. All thicknesses are suitable for all applications – the choice depends on weight, stability and the desired depth of the design, rather than primarily on acoustics.
Colors, availability and delivery time
Our PET colors are divided into four collections – these determine the stock location, minimum quantity and delivery time, depending on color and material thickness (the same color may belong to a different collection depending on thickness). The collection is included in the article number; the current stock level, delivery time and minimum order quantity for each item are shown directly in the “PET color” selection field.
-
Standard & Trend: over 30 colors permanently stocked at our warehouse in Germany and regularly replenished – available from 1 panel, with smaller quantities generally delivered in just 1–2 weeks including cutting to size and processing
-
Extended: also available from 1 panel, with a delivery time of approx. 6 weeks (rail freight). We stock several thousand panels in selected colors and thicknesses in Germany, and many times that quantity at our production site – because changing over PET production involves high setup costs, it is only economical in large quantities. This investment in stock is supported by the global market, not Europe alone; it enables us to offer the full range of colors and thicknesses
-
Production: manufactured specifically for your project – from approx. 300 panels (in some cases from as few as 200). We can start a batch at any time, match any desired color and supply custom sizes; production runs continuously at a width of 244 cm, with cuts across the width and length freely selectable
Fast delivery including cutting to size and processing is one of our strengths – especially for projects with tight deadlines.
Material and manufacturing
The vitAcoustic PET felt panel is made from recycled PET plastic bottles, which are processed into textile fibers and laid into a fiber web using a felting process. This web is then thermally bonded: a proportion of blended-in PET binder fibers (bicomponent fibers) partially melt in the oven and fuse the structure into a dimensionally stable panel – entirely without chemical adhesives or binders. It is this thermal bonding that gives the 9-mm panel its firm middle layer and clean, durable edge. The wide range of colors and mottled finishes is created by blending differently colored fibers before bonding. The recycled content is certified by SCS Global Services.
Note on the nonwoven composite: Unlike the rigid panel, the PET nonwoven backing is not thermally bonded. It remains soft and flexible and provides absorption extending into lower frequencies within the composite, while the rigid panel forms the designed visible face.
Acoustics and thermal insulation in one: As a vapor-permeable PET fiber material, the panel – especially as a nonwoven composite with our PET nonwoven – also provides thermal insulation: sound absorption and thermal insulation in a single assembly, for warm walls that do not feel clammy – also suitable for interior walls and sloped ceilings. We also offer the matching PET nonwoven separately: 30 mm and 40 mm.
- High areal weight (1.9 kg/m²) – densely pressed, dimensionally stable and with a firm edge
- Unaffected by moisture and water-resistant
- Resistant to mold, pests and dust mites
- Suitable for allergy sufferers – no volatile constituents
- Fully recyclable at the end of its service life
Fabrication and installation
The 9-mm panel is designed for use with standard woodworking tools: clean sawing and cutting to size (circular saw or jigsaw, oscillating knife). Various fixing systems are available depending on the application:
-
Adhesive bonding: e.g. UHU Polymax High Grip, UHU por contact adhesive or double-sided adhesive tape (CT-S 5735)
-
Screws and staples: particleboard screws, staples
-
Z-clips (Z-Clip): for removable, precisely aligned wall mounting
-
Magnetic mounting: for panels that can be removed without tools from a magnetic substrate
-
Ceiling suspension cables: for freely suspended ceiling clouds at the desired height
-
Halfen channels: for baffles and wall baffles, including installation in rows
Cleaning and care: vacuum like textile coverings or wipe with a damp cloth. Stubborn grease stains can be dissolved with a little thinner, and coffee or wine stains can be bleached with hydrogen peroxide (H2O2) – without damaging the PET fibers or color.
Certificates and standards
Tested for harmful substances and low-emission: Our PET acoustic panels are GREENGUARD Gold certified (UL 2818) and meet strict limits for chemical emissions indoors. Formaldehyde emissions are well below the requirements that apply throughout the EU from August 6, 2026 (REACH Annex XVII). The materials are also tested for substances of concern to health in accordance with OEKO-TEX Standard 100.
Fire safety even when freestanding: The 9-mm PET felt also achieves class B-s1,d0 (flame-resistant, EN 13501-1, TÜV SÜD) in freely suspended or freestanding applications – without rear fixing – relevant for ceiling clouds, baffles and room dividers.
-
Flame-resistant to EN 13501-1 (B-s1,d0) – TÜV-SÜD-tested, equivalent to fire classification B1 to DIN 4102
-
OEKO-TEX Standard 100 – tested for harmful substances, suitable for kindergartens, schools and clinics
-
Greenguard Gold – low VOC emissions for healthy indoor air
-
EPD (Environmental Product Declaration) – relevant for DGNB and LEED certification
-
SCS Recycled Content – certified recycled content
Technical properties
| Property |
Value |
| Construction |
Single-layer PET felt, thermally bonded (binder fibers); optional double-layer “Duo” = 18 mm |
| Material |
PET felt made from recycled PET bottles, thermally bonded – without chemical binders |
| Thickness |
9 mm (Duo 18 mm) |
| Areal weight |
1.9 kg/m² (Duo 3.8 kg/m²) |
| Acoustic function |
Porous broadband sound absorber; performance adjustable through air gap/assembly |
| Sound absorption class |
E directly mounted · D–C (50–100 mm air gap) · B (150 mm air gap) · A as nonwoven composite or ceiling cloud |
| αw |
0.25 (directly mounted) · 0.55–0.60 (50 mm air gap) · 0.75 (100 mm air gap) · 0.80 (150 mm air gap); composite/cloud → A · to DIN EN ISO 11654 |
| NRC |
0.30 (directly mounted) · 0.65 (50 mm air gap) · 0.75 (100 mm air gap) · 0.80 (150–200 mm air gap) |
| Frequency range |
Broadband; depending on air gap, peak absorption in the low-mid frequencies (speech range 200–500 Hz) |
| Edge finish |
CNC-cut edge; optional V-Cut miter/chamfer (30°/45°, folding edge) |
| Surface texture |
Smooth or V-Cut (Lines/Bricks/Triangle); optional UV printing |
| Color configuration |
50+ designer colors from stock; custom colors from 300 panels; two-color Duo |
| Made to measure |
CNC cutting to size from raw panel 2440x1220x9 mm; freeform shapes from DXF files |
| Fire classification |
Flame-resistant B-s1,d0 to EN 13501-1 (TÜV SÜD; equivalent to DIN 4102 B1) |
| Recycled content |
Recycled PET, content certified by SCS |
| Environmental declaration |
EPD (relevant for DGNB/LEED); GREENGUARD Gold (UL 2818, below REACH emission limit) |
| Harmful substance testing |
OEKO-TEX Standard 100 |
| Care |
Vacuum / wipe with a damp cloth; remove grease with thinner, bleach coffee/wine stains with H2O2 (without damaging the material) |
Samples, data sheets and shipping
Free color samples are available in the Samples and Miscellaneous category. Technical data sheets, absorption values and certificates can be found in our download section. Shipping: small parts and cut-to-size pieces are sent by parcel service, whole panels (2440x1220x9 mm) as palletized freight via a freight forwarder.
Planning a project or need custom sizes? Call us at +49 7248-93566-90 or email [email protected] – we manufacture to your specifications.