vitAcoustic ceiling clouds with wooden frames – custom-made acoustic ceiling clouds, in your choice of shape and color
vitAcoustic ceiling clouds with wooden frames are custom-made, freely suspended acoustic absorbers made from 9 mm PET felt – a floating design element that improves acoustics across large ceiling areas while creating a visual focal point. A wooden frame (18 × 40 mm) glued to the back keeps even large clouds permanently flat and prevents sagging.
The frame is glued in place inset from the panel edges, making it barely visible from below – the cloud appears light and floating. Its edges are covered with the same PET felt as the visible surface: this maintains a consistent PET appearance even when the cloud is viewed from the side – for example, above stairwells or from lower levels.
Clouds with wooden frames are intended exclusively for ceiling mounting. For wall mounting, we recommend our vitAcoustic Elements (VAE) or the 9-mm panel in a nonwoven composite.
The wooden frame – concealed stability
A wooden frame, 40 mm high and 18 mm wide, is glued to the back of the 9-mm PET panel. It gives the cloud the necessary rigidity – especially in large formats, where an unframed panel would sag over time. Because it is inset and covered with PET, it remains almost invisible from below and preserves the floating, frameless appearance.
Optional nonwoven infill: For maximum absorption, our PET composite nonwoven can also be inserted into the frame – the cloud then achieves the highest sound absorption class A.
Acoustic performance (rated according to DIN EN ISO 11654)
As a freely suspended cloud, the PET panel absorbs sound on both sides and uses the large gap below the ceiling as an air cavity – precisely the arrangement in which thin PET felt performs best. It is not the material thickness that determines performance, but the distance from the hard surface.
-
Freely suspended cloud (9 mm): high, broadband absorption – up to sound absorption class A
-
With nonwoven infill in the frame: sound absorption class A assured, including in the low-mid speech frequency range
The clouds therefore support compliance with DIN 18041 for reducing reverberation time and improve speech intelligibility – especially in reverberant, high-ceilinged rooms with large floor areas.
As with Elements: you can choose any shape at no extra cost – the price depends solely on size. This lets you create an individual ceiling design:
-
Free choice of shapes: rectangle, square, circle, hexagon, cloud/freeform & many more – combine as you wish
-
Freely selectable corner rounding (in the configuration) – from sharp corners to softly rounded
-
Surface textures: incised V-Cut designs (e.g. Lines) for depth through light and shadow
-
Cut-out patterns: openwork designs for graphic effects
Sizes from 400x400x50 mm to 2400x1200x50 mm
The clouds are available in eight size options, with final dimensions freely selectable within each option. Your choice of size is also a design decision:
-
Small formats (400x400x50 mm to 800x600x50 mm) create a particularly lively effect as mixed clusters – ideal for playful, colorful ceilings in daycare centers, pediatric practices or retail spaces.
-
Large formats (1200x800x50 mm to 2400x1200x50 mm) provide a large absorption area per cloud with calm, understated shapes – an efficient solution for offices, conference rooms and commercial interiors.
You will find a brief note on typical applications for each size in the product listing.
Mounting and lighting
-
Cable suspension: discreet stainless steel suspension cables (2/3- or 3/4-point), continuously height-adjustable – the cloud hangs flat and stable below the ceiling.
-
Magnetic mounting: removable attachment with a small gap (approx. 50 mm) to the ceiling or wall.
-
Optional LED integration: professional-grade indirect LED lighting (including DALI-dimmable options) or direct, glare-free downward-facing LED lenses – lighting and acoustics in one element.
Applications
Offices and conference rooms: floating clouds above meeting areas and open-plan spaces – improve speech intelligibility without structural alterations.
Lobbies, reception areas and commercial interiors: distinctive ceiling designs in high, reverberant spaces.
Restaurants and hotels: quieter spaces above table groupings, buffets and lounges.
Daycare centers, schools and practices: colorful clusters that create a decorative, sound-absorbing ceiling design.
Colors, availability and delivery time
Our PET colors are divided into four collections – these determine stock location, minimum quantity and delivery time, depending on color and material thickness (the same color may belong to a different collection depending on thickness). The collection is shown in the article number; you can see the current stock level, delivery time and minimum order quantity for each item directly in the “PET color” selection field.
-
Standard & Trend: over 30 colors permanently stocked at our warehouse in Germany, continuously replenished – available from 1 panel, with smaller quantities generally delivered in just 1–2 weeks, including cutting to size and processing
-
Extended: also available from 1 panel, with a delivery time of approx. 6 weeks (rail freight). We stock several thousand panels in selected colors and thicknesses in Germany, and many times that quantity at our production site – because changing over PET production involves high setup costs, production is only economical in large quantities. This inventory investment is supported by the global market, not Europe alone; it enables us to provide the full range of colors and thicknesses
-
Production: manufactured specifically for your project – from approx. 300 panels (in some cases from as few as 200). We can start a batch at any time, match any desired color and supply custom sizes; production runs continuously at a width of 244 cm, with cuts across the width and along the length freely selectable
Fast delivery including cutting to size and processing is one of our strengths – especially for projects with tight deadlines.
Note on quantities: “from 1 panel” and “from approx. 300 panels” refer to whole raw panels (2440x1220x9 mm), from which we cut your clouds – not to the number of finished clouds. Depending on the selected size, one raw panel can yield several clouds, or one large cloud may require several panels.
Material and origin
The visible surface consists of 9 mm PET felt made from recycled PET bottles, bonded exclusively using the needle technique (felt / nonwoven) – without adhesives or binders. The recycled content is certified by SCS Global Services; the optional nonwoven infill is produced in Germany. Cutting to size and final manufacturing take place in Straubenhardt, Germany (Made in Germany).
- Very lightweight (approx. 3 kg/m²) – quick and easy to install, even where structural load capacity is limited
- Moisture-resistant, wipe-resistant, free of fiber dust, suitable for allergy sufferers
- Resistant to mold, pests and dust mites
- Fully recyclable at the end of its service life
Certifications and standards
Tested for harmful substances and low-emission: Our PET acoustic panels are GREENGUARD Gold certified (UL 2818) and meet strict limits for indoor chemical emissions. Formaldehyde emissions are well below the requirements that apply throughout the EU from August 6, 2026 (REACH Annex XVII). In addition, the materials are tested for substances of concern to human health according to OEKO-TEX Standard 100.
Fire safety even in freestanding applications: The 9-mm PET felt also achieves class B-s1,d0 (flame-resistant, EN 13501-1, TÜV SÜD) in freely suspended or freestanding applications – without rear fixing – relevant for ceiling clouds, baffles and room dividers.
-
Flame-resistant according to EN 13501-1 (B-s1,d0) – equivalent to fire classification B1 according to DIN 4102
-
OEKO-TEX Standard 100 – tested for harmful substances
-
Greenguard Gold – low VOC emissions
-
EPD – relevant for DGNB and LEED projects
-
SCS Recycled Content – certified recycled content
Technical properties
| Property |
Value |
| Construction |
9 mm PET felt with a rear-mounted, PET-covered wooden frame (18 × 40 mm); optional nonwoven infill in the frame |
| Material |
PET felt from recycled PET bottles (needle technique, without binders); wooden frame |
| Thickness |
9 mm face panel; frame height 40 mm |
| Areal weight |
approx. 3 kg/m² |
| Acoustic function |
Freely suspended broadband sound absorber, effective on both sides |
| Sound absorption class |
Up to A (freely suspended) · A with nonwoven infill; according to DIN EN ISO 11654 |
| Surface texture |
Smooth, V-Cut designs (e.g. Lines) or cut-out patterns |
| Edge finish |
PET-covered frame edges (consistent appearance); freely selectable corner rounding |
| Color configuration |
50+ PET design colors available from stock; shapes and colors at no extra cost |
| Made to measure |
Free choice of shapes; sizes 400x400x50 mm to 2400x1200x50 mm, final dimensions freely selectable within each option |
| Installation |
Cable suspension (2/3- or 3/4-point, height-adjustable) or magnets; ceiling only |
| Origin |
Made in Germany (final manufacturing in Straubenhardt) |
| Recycled content |
Recycled PET, content certified by SCS |
| Environmental declaration |
EPD (DGNB/LEED); GREENGUARD Gold (UL 2818, below the REACH emission limit) |
| Fire classification |
Flame-resistant B-s1,d0 according to EN 13501-1 (equivalent to DIN 4102 B1) |
| Harmful substance testing |
OEKO-TEX Standard 100 |
| Care |
Vacuum / wipe with a damp cloth; wipe-resistant |
Samples, data sheets and advice
Free color samples are available in the Samples and Miscellaneous category. Technical data sheets, absorption values and certificates can be found in our download section. For advice on ceiling planning, custom shapes or quantities, please contact us at +49 7248-93566-90 or [email protected].